Semc S1 Unlock Tool Crack

Return to site

Semc S1 Unlock Tool Crack

[Guide] Bootloader and kernel guide | X8 | W8 | X10 mini | X10 mini proSemc S1 Unlock Tool Crack Office 2016
Semc S1 Unlock Tool Crack Windows 7
Semc S1 Unlock Tool Crack Download
Semc s1 unlock tool crack Suicide Squad (English) tamil full movie. Unions; Publication Date. January 21, 2009 Citation Information. Semc S1 Unlock Tool Crack Win 4,9/5 3785 reviews Atnsoft Key Remapper Serial Serial Numbers. Convert Atnsoft Key Remapper Serial trail version to full software.
Semc S1 Unlock Tool 170; S4 League Hgwc Bypass – IDCert Support; Devexpress Serial Crack - Comments; Torrentz - Fast and convenient Torrents Search Engine. Canon Service Support Tool vEr - Latest Release Canon SSTvEr for the installing of system software and firmware for the entire range of Canon photocopiers.
STUFF IN HEREUpdates, Contents, Disclaimer , Requirements, Recommended, Instructions (for both bootloader unlock and custom kernel flashing and relocking the bootloader), How to find out if the bootloader on your phone has been successfully unlocked , Benefits of Custom Kernel, Common problems, Myths concerned with unlocking bootloader.
__________________________________________________ _________________
Myths about what unlocking bootloader can do
1. Real dual touch for synaptic devices.
 2. Higher max CPU overclock frequency.
3. Sim-unlock your phone (allow it to use any carrier)
 __________________________________________________ __________________
Updates to this:
1. There is a new S1tool (a few weeks ago) that can relock the bootloader on your phone.
 2. (Outdated)
 3. (22/9/2011) Stock kernel files added, download and flash using Flashtool. 
 4. (30/9/2011) Added E10 stock kernel file, download and flash using Flashtool
5. Flashtool can bootloader unlock your phone, but I'm not sure if it can detect if your phone can be safely bootloader unlocked. It can bootloader unlock phones sim-unlocked by Omnius. Guide updated!
X8 (E15) and W8 stock kernel:
Download link: http://www.mediafire.com/?zb3zhdkodgy55ch#1
Direct download link: http://db.tt/NI2WBnUp
X10 mini pro (U20) stock kernel:
Direct download link: http://db.tt/ukt80PBn
X10 mini (E10) stock kernel:
Direct download link: http://db.tt/sbh9QFZ4
 ______________________________________________
 Originally Posted by Blagus
@all: If you unlocked with Omnius, PM me and I'll give you unlocked BL for such phones.
(OUTDATED)
 __________________________________________________ __________________
Before I start I must emphasise the fact that meddling with the bootloader is highly dangerous and will result in a hard brick if you don't follow proper instructions. Then, you will have to go and repair your phone by sending it to SE. I am not responsible if your phone dies on you because you didn't follow instructions or you screwed up somehow. I must also mention that this will probably void your warranty (rooting already probably voided it though) and that there is NO WAY to relock bootloader as of now.
Still interested? Details are below.
Requirements: Rooted phone, Sony Ericsson PC Companion installed in PC, Courage
You do not need to have a sim lock on your phone to unlock your bootloader.
Recommended:  Disable your antivirus (it might find a 'virus' in ADB.exe even though there isn't one and might even interfere in bootloader unlocking process)  Use stock rom (I managed to unlock bootloader on GingerDX v013 though and users have managed to unlock it in Froyobread v23b and MiniCM7 2.0.7)
Note: Unlocking the bootloader of your phone will restore the original sim lock of your phone (if you had any) unless if you unlocked with EMMA/IMEI unlock code or it was factory-unlocked or if SE unlocked it! 

However, some users have reported that using msm7227_semc.cmd on their sim-unlocked phones did not restore the sim lock onto their phone. This has not been confirmed as of yet. Unlock the bootloader on your sim unlocked phone AT YOUR OWN RISK!
 ______________________________________
1. Download the files needed for the unlock. (Credits go to the_laser for this tool.)
Original Post: http://forum.xda-developers.com/show…77&postcount=3
Direct download of tools: http://db.tt/0zUMR5S4
Files needed to determine if unlocking your phone's bootloader is safe: (Credits also go to the_laser for this tool.)
S1tool post: http://forum.xda-developers.com/show…0&postcount=26
Direct download link: http://db.tt/OrOQO33
__________________________________________________ __
1a.  Download Flashtool too (needed for S1tool to work properly and for loading custom kernels next time) and install it (not necessary if you already have Flashtool):
Download and install Flashtool v0.5.3 here (follow instructions on the website): http://androxyde.github.com/Flashtool/
(Credits go to Androxyde and Bin4ry for this tool.)
After installing it, open the flashtool folder and open the drivers folder inside that. Double click on the ggsetup-2.2.0.11.exe file inside and install Gordon's Gate.
Note: This Gordon's Gate Driver Installation will work for X8, X10 mini and X10 mini pro. I'm not sure about that of W8 but I think that is also supported.
Then restart your computer.
Open task manager and kill any ADB.exe process you find in there and don't load Flashtool for the rest of the installation process.
 __________________________________________________ _____________
Also, download and install Sony Ericsson PC Companion (not needed if you already have Sony Ericsson PC Companion on your computer) here (needed for the bootloader unlocking process).
Link: http://www.sonyericsson.com/cws/supp…61?cc=gb&lc=en
Direct download link: http://dl-www.sonyericsson.com/cws/d…01.217_Web.exe
Then just double click the .exe file and install Sony Ericsson PC Companion. Connect your phone to the PC after doing this and open Sony Ericsson PC Companion. Ensure that your phone is recognised by Sony Ericsson PC Companion.
__________________________________________________ _____________
2. Unzip the files needed for bootloader unlocking (S1tool and Bootloader Unlock tool) into an appropiate location on your PC.
Note: If your antivirus finds virus in ADB.exe, disable the antivirus. There is NO virus in ADB.exe and the antivirus will interfere in unlocking bootloader. 
2a. Turn off your phone.
2b. Open the directory you unzipped S1tool to and run S1tool.exe. Then, click on IDENTIFY button before proceeding to step 2c.
2c. Boot your phone into flash mode (make sure you installed Gordon's Gate found in step 1a first). All users, press and hold back button while connecting cable from PC to phone. Continue holding back button until you get some output. The LED on your phone should flash green if it is in flash mode.
Example of output:
If the simlock certificate specified is SEMC SIMLOCK CERTIFICATE, or anything other than NOT RECOGNIZED SIMLOCK CERTIFICATE, or if you are sure you sim-unlocked your phone using Omnius, jump to step 3.
 If the simlock certificate specified is NOT RECOGNIZED SIMLOCK CERTIFICATE, you can't unlock the bootloader of your phone. If you try, radio capability of your phone will be disabled (this has been reported to be untrue by a number of people who claim to have unlocked bootloader successfully with msm7227_semc.cmd).
Do note that the SIMLOCK certificate doesn't mean that you have/don't have a sim lock on your phone.



 3. Disconnect your phone from the computer, boot it up, and then reconnect your phone to your computer.
Operators Manual (OPT) - The operators manual (a.k.a. Owners manual) is the book that came OEM from the manufacturer when the Linamar LX720, LX770, LX790, LX990 Onan Engine was purchased. Created Date: 6:48:25 AM. LX720 LX770 LX790 OL16 OL18 OL20 P216G P218G P220G The following symbols are used in Onan manuals to alert users to the potentially dangerous condi- tions relating to maintenance of equipment and re- placement of parts. Please read and observe. This symbol warns of immedi- ate hazards which will result in severe personal injury or death. Linamar lx770 parts.
4. Enable USB debugging on your phone.
Note: Don't run Flashtool and terminate any ADB.exe process you find in task manager before performing step 5.
5. If you had 
 1: the SEMC SIMLOCK CERTFICATE message or if you 
 2: unlocked your phone using EMMA/IMEI code 
 3: or if your phone was already unlocked when you bought it (first-hand phone) 
 4: or if your phone is sim-locked, or if…
NOT CONFIRMED, TRY AT OWN RISK!
5: your phone was sim-unlocked through a 3rd party PC application (which was not Omnius) and was not SETool2,
__________________________________________________ _________________________
THEN
 run msm7227_semc.cmd in the directory you unzipped the unlocking files to and press any key to start the unlocking process. Alternatively, you could use Flashtool v0.5.3 to bootloader-unlock your phone (if you want to use Flashtool, go to step 5c). Go to step 5b2. 
If you 
 1: didn't have the SEMC SIMLOCK CERTIFICATE message and didn't have the NOT RECOGNISED SIMLOCK CERTIFICATE message
 2: or if you sim-unlocked your phone using SEtool2,
THEN
 go to step 5a.[/U][/B]
5a. Run msm7227_Setool2.cmd in the directory you extracted the bootloader unlock tool to and press any key to start the process. Alternatively, you could use Flashtool v0.5.3 to bootloader-unlock your phone (if you want to use Flashtool, go to step 5c)
If you
 1: know that your phone was sim-unlocked using Omnius,
THEN
go to step 5b1.
5b1. Run msm7227_OmniusSL.cmd in the directory you extracted the bootloader unlock tool to and press any key to start the process. Alternatively, you could use Flashtool v0.5.3 to bootloader-unlock your phone (if you want Flashtool, go to step 5c).
5b2. Open the example log included in the files. Wait 5 minutes. Then, compare the text in the window to those in the example log. They should be similar. Also, the last message on the window should be Press any key to continue. Note: It is recommended to turn off your antivirus before starting this as antivirus might interfere with the unlocking of bootloader on your phone (some antivirus software claim that there is virus in ADB.exe even though there isn't one)
Text in example log:
Note: If your log is very different from this please check if your bootloader is unlocked using step 7. If it is not unlocked, turn off your antivirus and repeat step 5 again. If you get some 'error: protocol fault' messages, that is completely fine, this is because the 'problem' is that your phone was still rebooting and USB debugging mode is not turned on when rebooting so it couldn't acquire the status and had an error. If you get many 'Access is denied' messages, turn off your antivirus and try again. Some users reported that the 'Access is denied' messages were eradicated and they successfully unlocked their bootloaders after turning off their antivirus. 
5c.
Start Flashtool, connect your phone and then wait for your phone to be recognized. Installshield limited edition 2017.
Then, go to: Plugins/(insert device name here) Unlock/run
A screen will pop up and ask you to connect your phone in Flash mode
1. Unplug the USB cable from your phone.
 2. Turn off your phone.
 3. Press and hold the 'Back' button on your phone.
 4. Plug in the USB cable to your phone.
 5. Release the 'Back' button after the screen that popped up disappears.
The unlocking process will start.
Wait until Flashtool asks you to disconnect the cable off the phone, then turn on the device and connect the usb cable once again.
Wait for Flashtool to push the required files to your phone.
After a while, Flashtool will have the message 'Successfully applied unlock' and the phone will reboot.
__________________________________________________ ____________
6. Disconnect your phone from the PC. Congratulations, your phone has an unlocked bootloader now!
7. To verify if your bootloader is unlocked successfully, again, use S1tool found here: http://forum.xda-developers.com/show…0&postcount=26.
Direct download link: http://db.tt/OrOQO33
Also, download and install Flashtool v0.5.3 here (follow instructions on the website): http://androxyde.github.com/Flashtool/
(Credits go to Androxyde and Bin4ry for this tool.)
After installing it, open the flashtool folder and open the drivers folder inside that. Double click on the ggsetup-2.2.0.11.exe file inside and install Gordon's Gate (needed for S1tool to work).
Note: This Gordon's Gate Driver Installation will work for X8, X10 mini and X10 mini pro. I'm not sure about that of W8 but I think that is also supported.
Semc S1 Unlock Tool Crack Office 2016After downloading s1tool and extracting it to an appropiate location on your PC (not needed you already have S1tool), shut down your phone.
Open s1tool.exe found in the directory you extracted s1tool to and then click IDENTIFY button.
Boot your phone into flash mode (Press and hold back button while connecting it to your PC using an usb cable. The LED on your phone should flash green). Continue holding back button until you get some output.
Example of output:
If the line RUNNING S1_EROM FROM VER '#8A02$' has a lowercase 'r' letter replacing the '#' (RUNNING S1_EROM FROM VER 'r8A02$'), your bootloader has been unlocked . If it has an uppercase 'R' replacing the '#' (RUNNING S1_EROM FROM VER 'R8A02$'), your bootloader is NOT unlocked .
Note: The value of the '$' is dependent on an unknown factor. The unknown factor doesn't matter to us.
How do I know this? Here:
 Originally Posted by the_laser in the bootloader unlock thread
unlocked bootloader require unlocked loader, yep ? 
loaderloader.sin is special unlocked loader, which will be accepted ONLY after your 'unlock' semcboot with previous steps.
to distinguish unlocked semcboot and original semcboot, first letter in version tag of semcboot output will be lower case, i. e. 'r8A029'
__________________________________________________ __________
HOW TO RELOCK BOOTLOADER :
0. Flash back stock kernel using 'Repair' option in SEUS or by using Flashtool (if using Flashtool either flash stock firmware or flash the appropiate .ftf file below): 
X8 (E15) and W8 stock kernel:
Download link: http://www.mediafire.com/?zb3zhdkodgy55ch#1
Direct download link: http://db.tt/NI2WBnUp
X10 mini pro (U20) stock kernel:
Direct download link: http://db.tt/ukt80PBn
X10 mini (E10) stock kernel:
Direct download link: http://db.tt/sbh9QFZ4
__________________________________________________ _______
If you relock your bootloader while using a custom kernel your phone will be bricked! 
1. Download S1tool and extract it to an appropiate location on your PC (not needed if you already have s1tool) . (Credits go to the_laser for this tool)
S1tool post: http://forum.xda-developers.com/show…0&postcount=26
Direct download link: http://db.tt/OrOQO33
2. Then, download and install Flashtool v0.5.3 here (follow instructions on the website): http://androxyde.github.com/Flashtool/
(Credits go to Androxyde and Bin4ry for this tool.)
After installing it, open the flashtool folder and open the drivers folder inside that. Double click on the ggsetup-2.2.0.11.exe file inside and install Gordon's Gate (needed for Flashtool to work).
Note: This Gordon's Gate Driver Installation will work for X8, X10 mini and X10 mini pro. I'm not sure about that of W8 but I think that is also supported.
Note: This Flashtool and Gordon's Gate installation is not needed if you have already done this.
3. Turn off your phone.
4. Launch s1tool.exe in the folder you extracted s1tool to.
5. Click on Restore button and then connect your phone to the PC in flash mode (press and hold back button while connecting your phone to the PC).
6. Wait for the process to complete. Congratulations! You now have relocked your bootloader!
7. To check, open s1tool.exe, click IDENTIFY button, turn off your phone, connect it in flash mode to the PC (press and hold back button while connecting your phone to the PC. The LED on your phone should flash green).
8. Continue holding back button until there is some output.
Example of output:
If the line RUNNING S1_EROM FROM VER '#8A02$' has a lowercase 'r' letter replacing the '#' (RUNNING S1_EROM FROM VER 'r8A02$'), your bootloader was not successfully relocked . If it has an uppercase 'R' replacing the '#' (RUNNING S1_EROM FROM VER 'R8A02$'), your bootloader has been successfully relocked .
Note: The value of the '$' is dependent on an unknown factor. The unknown factor doesn't matter to us.
How do I know this? Here:
 Originally Posted by the_laser in the bootloader unlock thread
unlocked bootloader require unlocked loader, yep ? 
loaderloader.sin is special unlocked loader, which will be accepted ONLY after your 'unlock' semcboot with previous steps.
to distinguish unlocked semcboot and original semcboot, first letter in version tag of semcboot output will be lower case, i. e. 'r8A029'

__________________________________________________ __________
9. How to flash custom kernels:
a. Download the (kernel name).ftf file provided by the kernel developer
 b. Download and install Flashtool v0.5.3 here (follow instructions on the website): http://androxyde.github.com/Flashtool/
(Credits go to Androxyde and Bin4ry for this tool.)
After installing it, open the flashtool folder and open the drivers folder inside that. Double click on the ggsetup-2.2.0.11.exe file inside and install Gordon's Gate (needed for Flashtool to work).
Note: This Gordon's Gate Driver Installation will work for X8, X10 mini and X10 mini pro. I'm not sure about that of W8 but I think that is also supported.
Then restart your computer.
_______________________________________________
Generally you have to delete all the files in /system/lib/modules before flashing a custom kernel!
c. Put the (kernel name).ftf file in the /firmwares folder. (Don't flash any .sin files, flash only the .ftf file.)
 d. Open Flashtool.
 e. Click Flash.
 f. Select (kernel name).ftf.
 g. Turn off your phone.
 h. Connect your phone in flash mode (only when the popup window prompts for you to do so). (To boot into flash mode, press and hold back button while connecting your phone to the PC using an usb cable).
 i. Disconnect your phone (do so only when the popup window to prompts you to disconnect your phone).
 j. Reboot and you have a custom kernel! 
 k. Confirm by going to Settings –> About Phone –> Kernel version. It should have the name of the kernel you flashed.
 m. To flash back to stock kernel, download the appropriate file below and follow steps listed above.
X8 (E15) and W8 stock kernel:
Download link: http://www.mediafire.com/?zb3zhdkodgy55ch#1
Direct download link: http://db.tt/NI2WBnUp
X10 mini pro (U20) stock kernel:

However, some users have reported that using msm7227_semc.cmd on their sim-unlocked phones did not restore the sim lock onto their phone. This has not been confirmed as of yet. Unlock the bootloader on your sim unlocked phone AT YOUR OWN RISK!
 ______________________________________
1. Download the files needed for the unlock. (Credits go to the_laser for this tool.)
Original Post: http://forum.xda-developers.com/show…77&postcount=3
Direct download of tools: http://db.tt/0zUMR5S4
Files needed to determine if unlocking your phone's bootloader is safe: (Credits also go to the_laser for this tool.)
S1tool post: http://forum.xda-developers.com/show…0&postcount=26
Direct download link: http://db.tt/OrOQO33
__________________________________________________ __
1a.  Download Flashtool too (needed for S1tool to work properly and for loading custom kernels next time) and install it (not necessary if you already have Flashtool):
Download and install Flashtool v0.5.3 here (follow instructions on the website): http://androxyde.github.com/Flashtool/
(Credits go to Androxyde and Bin4ry for this tool.)
After installing it, open the flashtool folder and open the drivers folder inside that. Double click on the ggsetup-2.2.0.11.exe file inside and install Gordon's Gate.
Note: This Gordon's Gate Driver Installation will work for X8, X10 mini and X10 mini pro. I'm not sure about that of W8 but I think that is also supported.
Then restart your computer.
Open task manager and kill any ADB.exe process you find in there and don't load Flashtool for the rest of the installation process.
 __________________________________________________ _____________
Also, download and install Sony Ericsson PC Companion (not needed if you already have Sony Ericsson PC Companion on your computer) here (needed for the bootloader unlocking process).
Link: http://www.sonyericsson.com/cws/supp…61?cc=gb&lc=en
Direct download link: http://dl-www.sonyericsson.com/cws/d…01.217_Web.exe
Then just double click the .exe file and install Sony Ericsson PC Companion. Connect your phone to the PC after doing this and open Sony Ericsson PC Companion. Ensure that your phone is recognised by Sony Ericsson PC Companion.
__________________________________________________ _____________
2. Unzip the files needed for bootloader unlocking (S1tool and Bootloader Unlock tool) into an appropiate location on your PC.
Note: If your antivirus finds virus in ADB.exe, disable the antivirus. There is NO virus in ADB.exe and the antivirus will interfere in unlocking bootloader. 
2a. Turn off your phone.
2b. Open the directory you unzipped S1tool to and run S1tool.exe. Then, click on IDENTIFY button before proceeding to step 2c.
2c. Boot your phone into flash mode (make sure you installed Gordon's Gate found in step 1a first). All users, press and hold back button while connecting cable from PC to phone. Continue holding back button until you get some output. The LED on your phone should flash green if it is in flash mode.
Example of output:
If the simlock certificate specified is SEMC SIMLOCK CERTIFICATE, or anything other than NOT RECOGNIZED SIMLOCK CERTIFICATE, or if you are sure you sim-unlocked your phone using Omnius, jump to step 3.
 If the simlock certificate specified is NOT RECOGNIZED SIMLOCK CERTIFICATE, you can't unlock the bootloader of your phone. If you try, radio capability of your phone will be disabled (this has been reported to be untrue by a number of people who claim to have unlocked bootloader successfully with msm7227_semc.cmd).
Do note that the SIMLOCK certificate doesn't mean that you have/don't have a sim lock on your phone.



 3. Disconnect your phone from the computer, boot it up, and then reconnect your phone to your computer.
Operators Manual (OPT) - The operators manual (a.k.a. Owners manual) is the book that came OEM from the manufacturer when the Linamar LX720, LX770, LX790, LX990 Onan Engine was purchased. Created Date: 6:48:25 AM. LX720 LX770 LX790 OL16 OL18 OL20 P216G P218G P220G The following symbols are used in Onan manuals to alert users to the potentially dangerous condi- tions relating to maintenance of equipment and re- placement of parts. Please read and observe. This symbol warns of immedi- ate hazards which will result in severe personal injury or death. Linamar lx770 parts.
4. Enable USB debugging on your phone.
Note: Don't run Flashtool and terminate any ADB.exe process you find in task manager before performing step 5.
5. If you had 
 1: the SEMC SIMLOCK CERTFICATE message or if you 
 2: unlocked your phone using EMMA/IMEI code 
 3: or if your phone was already unlocked when you bought it (first-hand phone) 
 4: or if your phone is sim-locked, or if…
NOT CONFIRMED, TRY AT OWN RISK!
5: your phone was sim-unlocked through a 3rd party PC application (which was not Omnius) and was not SETool2,
__________________________________________________ _________________________
THEN
 run msm7227_semc.cmd in the directory you unzipped the unlocking files to and press any key to start the unlocking process. Alternatively, you could use Flashtool v0.5.3 to bootloader-unlock your phone (if you want to use Flashtool, go to step 5c). Go to step 5b2. 
If you 
 1: didn't have the SEMC SIMLOCK CERTIFICATE message and didn't have the NOT RECOGNISED SIMLOCK CERTIFICATE message
 2: or if you sim-unlocked your phone using SEtool2,
THEN
 go to step 5a.[/U][/B]
5a. Run msm7227_Setool2.cmd in the directory you extracted the bootloader unlock tool to and press any key to start the process. Alternatively, you could use Flashtool v0.5.3 to bootloader-unlock your phone (if you want to use Flashtool, go to step 5c)
If you
 1: know that your phone was sim-unlocked using Omnius,
THEN
go to step 5b1.
5b1. Run msm7227_OmniusSL.cmd in the directory you extracted the bootloader unlock tool to and press any key to start the process. Alternatively, you could use Flashtool v0.5.3 to bootloader-unlock your phone (if you want Flashtool, go to step 5c).
5b2. Open the example log included in the files. Wait 5 minutes. Then, compare the text in the window to those in the example log. They should be similar. Also, the last message on the window should be Press any key to continue. Note: It is recommended to turn off your antivirus before starting this as antivirus might interfere with the unlocking of bootloader on your phone (some antivirus software claim that there is virus in ADB.exe even though there isn't one)
Text in example log:
Note: If your log is very different from this please check if your bootloader is unlocked using step 7. If it is not unlocked, turn off your antivirus and repeat step 5 again. If you get some 'error: protocol fault' messages, that is completely fine, this is because the 'problem' is that your phone was still rebooting and USB debugging mode is not turned on when rebooting so it couldn't acquire the status and had an error. If you get many 'Access is denied' messages, turn off your antivirus and try again. Some users reported that the 'Access is denied' messages were eradicated and they successfully unlocked their bootloaders after turning off their antivirus. 
5c.
Start Flashtool, connect your phone and then wait for your phone to be recognized. Installshield limited edition 2017.
Then, go to: Plugins/(insert device name here) Unlock/run
A screen will pop up and ask you to connect your phone in Flash mode
1. Unplug the USB cable from your phone.
 2. Turn off your phone.
 3. Press and hold the 'Back' button on your phone.
 4. Plug in the USB cable to your phone.
 5. Release the 'Back' button after the screen that popped up disappears.
The unlocking process will start.
Wait until Flashtool asks you to disconnect the cable off the phone, then turn on the device and connect the usb cable once again.
Wait for Flashtool to push the required files to your phone.
After a while, Flashtool will have the message 'Successfully applied unlock' and the phone will reboot.
__________________________________________________ ____________
6. Disconnect your phone from the PC. Congratulations, your phone has an unlocked bootloader now!
7. To verify if your bootloader is unlocked successfully, again, use S1tool found here: http://forum.xda-developers.com/show…0&postcount=26.
Direct download link: http://db.tt/OrOQO33
Also, download and install Flashtool v0.5.3 here (follow instructions on the website): http://androxyde.github.com/Flashtool/
(Credits go to Androxyde and Bin4ry for this tool.)
After installing it, open the flashtool folder and open the drivers folder inside that. Double click on the ggsetup-2.2.0.11.exe file inside and install Gordon's Gate (needed for S1tool to work).
Note: This Gordon's Gate Driver Installation will work for X8, X10 mini and X10 mini pro. I'm not sure about that of W8 but I think that is also supported.
Semc S1 Unlock Tool Crack Office 2016After downloading s1tool and extracting it to an appropiate location on your PC (not needed you already have S1tool), shut down your phone.
Open s1tool.exe found in the directory you extracted s1tool to and then click IDENTIFY button.
Boot your phone into flash mode (Press and hold back button while connecting it to your PC using an usb cable. The LED on your phone should flash green). Continue holding back button until you get some output.
Example of output:
If the line RUNNING S1_EROM FROM VER '#8A02$' has a lowercase 'r' letter replacing the '#' (RUNNING S1_EROM FROM VER 'r8A02$'), your bootloader has been unlocked . If it has an uppercase 'R' replacing the '#' (RUNNING S1_EROM FROM VER 'R8A02$'), your bootloader is NOT unlocked .
Note: The value of the '$' is dependent on an unknown factor. The unknown factor doesn't matter to us.
How do I know this? Here:
 Originally Posted by the_laser in the bootloader unlock thread
unlocked bootloader require unlocked loader, yep ? 
loaderloader.sin is special unlocked loader, which will be accepted ONLY after your 'unlock' semcboot with previous steps.
to distinguish unlocked semcboot and original semcboot, first letter in version tag of semcboot output will be lower case, i. e. 'r8A029'
__________________________________________________ __________
HOW TO RELOCK BOOTLOADER :
0. Flash back stock kernel using 'Repair' option in SEUS or by using Flashtool (if using Flashtool either flash stock firmware or flash the appropiate .ftf file below): 
X8 (E15) and W8 stock kernel:
Download link: http://www.mediafire.com/?zb3zhdkodgy55ch#1
Direct download link: http://db.tt/NI2WBnUp
X10 mini pro (U20) stock kernel:
Direct download link: http://db.tt/ukt80PBn
X10 mini (E10) stock kernel:
Direct download link: http://db.tt/sbh9QFZ4
__________________________________________________ _______
If you relock your bootloader while using a custom kernel your phone will be bricked! 
1. Download S1tool and extract it to an appropiate location on your PC (not needed if you already have s1tool) . (Credits go to the_laser for this tool)
S1tool post: http://forum.xda-developers.com/show…0&postcount=26
Direct download link: http://db.tt/OrOQO33
2. Then, download and install Flashtool v0.5.3 here (follow instructions on the website): http://androxyde.github.com/Flashtool/
(Credits go to Androxyde and Bin4ry for this tool.)
After installing it, open the flashtool folder and open the drivers folder inside that. Double click on the ggsetup-2.2.0.11.exe file inside and install Gordon's Gate (needed for Flashtool to work).
Note: This Gordon's Gate Driver Installation will work for X8, X10 mini and X10 mini pro. I'm not sure about that of W8 but I think that is also supported.
Note: This Flashtool and Gordon's Gate installation is not needed if you have already done this.
3. Turn off your phone.
4. Launch s1tool.exe in the folder you extracted s1tool to.
5. Click on Restore button and then connect your phone to the PC in flash mode (press and hold back button while connecting your phone to the PC).
6. Wait for the process to complete. Congratulations! You now have relocked your bootloader!
7. To check, open s1tool.exe, click IDENTIFY button, turn off your phone, connect it in flash mode to the PC (press and hold back button while connecting your phone to the PC. The LED on your phone should flash green).
8. Continue holding back button until there is some output.
Example of output:
If the line RUNNING S1_EROM FROM VER '#8A02$' has a lowercase 'r' letter replacing the '#' (RUNNING S1_EROM FROM VER 'r8A02$'), your bootloader was not successfully relocked . If it has an uppercase 'R' replacing the '#' (RUNNING S1_EROM FROM VER 'R8A02$'), your bootloader has been successfully relocked .
Note: The value of the '$' is dependent on an unknown factor. The unknown factor doesn't matter to us.
How do I know this? Here:
 Originally Posted by the_laser in the bootloader unlock thread
unlocked bootloader require unlocked loader, yep ? 
loaderloader.sin is special unlocked loader, which will be accepted ONLY after your 'unlock' semcboot with previous steps.
to distinguish unlocked semcboot and original semcboot, first letter in version tag of semcboot output will be lower case, i. e. 'r8A029'
__________________________________________________ __________
9. How to flash custom kernels:
a. Download the (kernel name).ftf file provided by the kernel developer
 b. Download and install Flashtool v0.5.3 here (follow instructions on the website): http://androxyde.github.com/Flashtool/
(Credits go to Androxyde and Bin4ry for this tool.)
After installing it, open the flashtool folder and open the drivers folder inside that. Double click on the ggsetup-2.2.0.11.exe file inside and install Gordon's Gate (needed for Flashtool to work).
Note: This Gordon's Gate Driver Installation will work for X8, X10 mini and X10 mini pro. I'm not sure about that of W8 but I think that is also supported.
Then restart your computer.
_______________________________________________
Generally you have to delete all the files in /system/lib/modules before flashing a custom kernel!
c. Put the (kernel name).ftf file in the /firmwares folder. (Don't flash any .sin files, flash only the .ftf file.)
 d. Open Flashtool.
 e. Click Flash.
 f. Select (kernel name).ftf.
 g. Turn off your phone.
 h. Connect your phone in flash mode (only when the popup window prompts for you to do so). (To boot into flash mode, press and hold back button while connecting your phone to the PC using an usb cable).
 i. Disconnect your phone (do so only when the popup window to prompts you to disconnect your phone).
 j. Reboot and you have a custom kernel! 
 k. Confirm by going to Settings –> About Phone –> Kernel version. It should have the name of the kernel you flashed.
 m. To flash back to stock kernel, download the appropriate file below and follow steps listed above.
X8 (E15) and W8 stock kernel:
Download link: http://www.mediafire.com/?zb3zhdkodgy55ch#1
Direct download link: http://db.tt/NI2WBnUp
X10 mini pro (U20) stock kernel:
Direct download link: http://db.tt/ukt80PBn
X10 mini (E10) stock kernel:
Direct download link: http://db.tt/sbh9QFZ4
__________________________________________________ __________________________________________________ _____________
Semc S1 Unlock Tool Crack Windows 7Benefits of unlocked bootloader: Custom kernels, recovery in kernel (no more accidents involving formating /system and having to reflash stock because recovery is gone), GPU overclock, swap support, modules loaded in kernel, conversion of /system etc to ext4 resulting in faster phone, USB host support, full support for custom roms….
 The possibilities are endless .
 __________________________________________________ ______________________
__________________________________________________ ___
Troubleshooting section:
Common Problems:
1. My SIM Card is not recognised after unlocking phone with msm7227_setool2.cmd!
 Ans: Redo unlocking procedure (step 5 onwards) using msm7227_semc.cmd.
2. I get lots of 'Access is denied' messages while unlocking!
 Ans: Disable your antivirus and try the unlocking process again. Antivirus finds a virus in ADB.exe even though there isn't one!
3. I get some 'error: protocol fault' messages!
 Ans: It's normal and this isn't a problem. This is because the tool is inquiring for your phone while the phone is rebooting. USB debugging mode isn't on when phone is rebooting so it causes some errors. Eventually, your phone will connect with your PC so this is not an issue.
4. I get some 'exec /system/bin/sh failed' messages!
 Ans: Reroot your phone using SuperOneClick and try again.
 SuperOneClick link: http://forum.xda-developers.com/showthread.php?t=803682
5. Default camera doesn't work after unlocking!
 Ans: 
 1. Reflash baseband 15 again.
 2. Reflash stock 2.1 using flashtool.
 3. Test camera, it will have the message 'Indexing Media File' on the screen.
 4. Wait until it disappear from the screen.
 5. Reboot
 6. Test camera and it will work fine.
6. I get a lot of 'daemon not started successfully' and 'failed to start daemon' messages!
 Ans: Disconnect phone, exit the command window, reconnect phone, and try unlocking your phone's bootloader again. Repeat until there is no more of such messages and bootloader is successfully unlocked. Also, make sure you have installed Sony Ericsson PC Companion in step 1 and that it recognises your phone.
If you have a problem that is not listed above please post it in this thread 
 __________________________________________________ ______________________
All credits go to the bootloader devs (Blagus, the_laser, maxrfon etc).
Incoming search terms:Edge Magazine direct download link
sony ericsson xperia flasher by bin4ry & androxyde download
sony ericsson xperia flasher by bin4ry & androxyde free download
sony ericsson xperia flasher by bin4ry & androxyde
sony ericsson xperia x8 flasher by bin4ry download
sony ericsson x8 flasher by bin4ry & androxyde
sony ericsson xperia x8 flasher by bin4ry & androxyde
x8 brick not detected flashtool
sony ericsson xperia flasher by bin4ry
descargar x8 flasher lib
We share here to download Miracle Vivo Tool Update V4.26 Update from here, Miracle Vivo Tool Update is a utility Android Multi-tool that helps to fix some software problems on your devices. Miracle Vivo Tool Setup version is available now to download from here, with this Miracle tool is available only for the latest version it has some interesting features for your Android devices. 
it supports almost all Android devices in ADB and Fastboot mode, also supports Samsung devices in download mode and Qualcomm devices in EDL modes. here share with your latest Keygen file also to activate the tool on your pc. we discuss some more features of this tool below.
What is Miracle Vivo Tool Update V4.26Semc S1 Unlock Tool Crack DownloadMiracle Vivo Tool Update V4.26 is the latest GSM Mobile Software repair tool. This is a new innovation for Chinese latest Android devices, it supports almost all Vivo devices nowadays in India and the world, 
Miracle Vivo Tool Update V4.26 easily repairs all the devices software and unlock too many supported Android devices easily,
This is the first universal data card for unlocking/Flashing product worldwide, 
This tool, can repair the devices and make it alive again and do Password Remove,
Accounts Unlock, and Bootloader Unlock is fast and No Need Any Activation or buys the Credits 

Features of Miracle Vivo Tool Update V4.26[+] Free For Huawei Pack Users
[+] Free For FRP Pack Users.
[+] Free For Miracle FRP Dongle.
What's new in this update setupImproved OPPO (Meta) Reset Support
Add MTK 6785 Support
Add Free For FRP/Thunder/Miracle Box
Improved Some Functions.
v4.22 ChangelogAdd OPPO A5s (Meta) Reset Supported.
OPPO A3 (Meta) Reset Supported Added.
Add OPPO F9 (Meta) Reset Supported.
Vivo Y91(MT) Factory Reset/Account Remove Support Added.
Vivo Y91i Factory Reset/Account Remove Support Added.
Add Vivo Y91c Factory Reset/Account Remove Support.
Improved Some Function.
Added DevicesVIVO Y91
VIVO Y91i
VIVO Y91c
VIVO S1
VIVO U1
VIVO X27
VIVO 1716
VIVO iQoo
VIVO NEX
VIVO NEX DUAL
VIVO NEX S
VIVO SL
VIVO SL Plus
VIVO V1
VIVO V1 MAX
VIVO V11
VIVO V11 Pro
VIVO V11i
VIVO V21i
VIVO V3
VIVO V3
VIVO V3 MAX
VIVO V5
VIVO V5 PLUS
VIVO V5s
VIVO V7
VIVO V7 PLUS
VIVO V9
VIVO V9 Youth
VIVO X20
VIVO X20 Plus
VIVO X20 Plus L
VIVO X20 SL
VIVO X20 UD Plus
VIVO X20/A
Vivo X20A
VIVO X20plus
VIVO X21
VIVO X21A
VIVO X21i
VIVO X21i
VIVO X21i/A
VIVO X21UD
VIVO X21UD A
VIVO X21UD/A
VIVO X23
VIVO X23HS_A
VIVO X23HS_E
VIVO X27
VIVO X3F
VIVO X3L
VIVO X3S W
VIVO X3T
VIVO X3V
VIVO X5
VIVO X5 PRO V
VIVO X5 L
VIVO X5 MAX
VIVO X5 MAX D
VIVO X5 MAX L
VIVO X5 MAX PLUS
VIVO X5 MAX PRO
VIVO X5 MAX S
VIVO X5 MAX V
VIVO X5 ProD
VIVO X5 ProV
VIVO X5 SL
VIVO X5F
VIVO X5M
VIVO X5V
VIVO X6 PlusA
VIVO X6A
VIVO X6S Plus
VIVO X6S/A
VIVO X7
VIVO X7 PLUS
VIVO X710F
VIVO X710L
VIVO X7plus
VIVO X9
VIVO X9 Plus
VIVO X9 SL Plus
VIVO X9i
VIVO X9L
VIVO X9lay
VIVO X9plus
VIVO X9S
VIVO X9S Plus
VIVO X9S PlusL
VIVO X9S/SL
VIVO X9splus
VIVO XPLAY 3S
VIVO XPLAY 5A
VIVO Xplay 5S
VIVO Xplay 6
VIVO Xplay 6L
VIVO XSHOT
VIVO X-Shot
VIVO Y11
VIVO Y11IT
VIVO Y11IW
VIVO Y11T
VIVO Y13
VIVO Y13L
VIVO Y13T
VIVO Y15
VIVO Y15BW
VIVO Y15CW
VIVO Y15S
VIVO Y15T
VIVO Y1613
VIVO Y1613F
VIVO Y17T
VIVO Y17W
VIVO Y18L
VIVO Y19T
VIVO Y20T
VIVO Y21
VIVO Y21L
VIVO Y22
VIVO Y22IL
VIVO Y22L
VIVO Y23
VIVO Y23L
VIVO Y25
VIVO Y27
VIVO Y28
VIVO Y28L
VIVO Y29L
VIVO Y31
VIVO Y31A
VIVO Y31I
VIVO Y31L
VIVO Y33
VIVO Y35
VIVO Y35A
VIVO Y35L
VIVO Y37L
VIVO Y51
VIVO Y51/A
VIVO Y51A
VIVO Y51C
VIVO Y51L
VIVO Y52
VIVO Y53
VIVO Y53L
VIVO Y55
VIVO Y55/A
VIVO Y55L
VIVO Y55S
VIVO Y55S New
VIVO Y613F
VIVO Y622
VIVO Y623
VIVO Y65
VIVO Y66
VIVO Y66/L
VIVO Y66A
VIVO Y66I
VIVO Y66L
VIVO Y66PD1621
VIVO Y69
VIVO Y71
VIVO Y71/A
VIVO Y71A
VIVO Y71S
VIVO Y73
VIVO Y75S
VIVO Y75S New
VIVO Y79
VIVO Y79 New
VIVO Y79A
VIVO Y79L
VIVO Y81s
VIVO Y83
VIVO Y85
VIVO Y85/A
VIVO Y913
VIVO Y923
VIVO Y927
VIVO Y928
VIVO Y93
VIVO Y937
VIVO Y93s
VIVO Y95
VIVO Y97
VIVO Z1
VIVO Z1i
VIVO Z3
VIVO Z3i
VIVO X21i/A
VIVO Y81s
VIVO Y97
VIVO Z3i
VIVO V11i
VIVO Y93s
VIVO Y83
Vivo X27
Vivo Z3X
Download Miracle Vivo Tool Update V4.26File Name:-Miracle Dongle Update.zip
How to Install Miracle Vivo Tool to your PCDownload Miracle Vivo Tool Latest Setup.
After that, extract all the files to your PC.
Then open the extracted folder.
Once the tool opens then it will ask to install the tool,
Then click Next -> Next -> Agree -> Finish.
Run the 'Miracle Vivo Tool.exe' from there.
After that, a popup box will open.
Then click the 'Start' button from there.
Done, now wait a few secs to launch Miracle Vivo Tool to your computer. then you use the tool.
Check Other Tool
Subscribe Our Channel For More Interesting Videos Daily (On Youtube):-SUBSCRIBE
Thanks for visiting us, Comment below if you face any problem With this post, we will try to solve your problem as soon as possible. you can check other some tutorial here to help you.